Импулсен прах пожарогасител за автомобил и автобусен двигател отделение

ФУНКЦИИ

This product have features that similar to our Minisol Aerosol Fire Extinguisher, има:

• Small volume.
• Fully functional.
• Easy to install.
• Have function of manual start, automatic start and signal feedback.
• Comply with requirements of GB7258-2012 and international standards.
• Reliable quality and low price.
• Waterproof, moisture proof, freeze proof, and not require any pressurized cylinder to load.
• Good sealing and anti-vibration.
• Long service life, and in line with ISO vibration standard for vehicle fire extinguishers.

ПРИЛОЖЕНИЯ

It mainly used for the following fields:

• Vehicle engine compartment, such as bus, car.
• Vessel engine room.
• Battery compartment.
• Retarder.
• Generator room.
• Distribution cabinet.
• Charging pile.
• Cable trench and cable tunnel.
• Архиви.

INSTRUCTIONS FOR USE AND MAINTENANCE

When the driver and occupant find and confirm the fire in the engine compartment, open the cover of the starter controller box which located in the cab, Press the red start button hardly to start the fire extinguisher to put out the fire(attention: There are two miniature buttons under the red launch button board, Only by pressing at the same time, the fire extinguishing device can be activated, otherwise the fire extinguishing device will not be activated); Do not open engine compartment doors and covers before and after extinguishing a fire, Because the fire extinguishing effect is better in closed space.

Drivers and passengers should inspect the fire extinguisher regularly, азf the aluminum foil at the nozzle of the fire extinguishing device is damaged, the screws of the fire extinguishing device are loose, and the wiring is disconnected, it should be replaced and repaired in time.

Avoid open flame and high temperature operation to avoid mis-operation; when disassembling and assembling the fire extinguishing device, please ask the professional person who know about this device.

TRANSPORT AND STORAGE

• Handle with care when transporting.
• Throwing is strictly prohibited.
• Prevent collision.
• Avoid exposure to sunlight and rain.
• Storage warehouses require ventilation, dryness and cleanliness.
• The height should not exceed 6 layers.

EXPIRATION DATE

The warranty period for this fire extinguishing device is 2 Години, and life span is 5 да 10 Години, after the expiration date, please contact your local dealer or manufacturer, we will replace at a discounted price.

AFTER SALES SERVICE

Our company has an after-sales service department, and has established quality and after-sales tracking service files, Free replacement if the product has quality problems.

INSTALLATION PRECAUTIONS

• Open flame and with electricity must be avoided during installation.
• This device must use the nominal working pressure and current.
• Regularly check the fire extinguishing device. If the fire extinguishing device is damaged or has been sprayed, the fire extinguishing device must be replaced in time.

Temperature control(thermal cord 175℃) installation precautions

The jet of the fire extinguisher needs to be aimed at the engine and fixed firmly, Thermal wires are routed around the engine, The thermal line and the fire extinguisher should be 15 cm away from the engine.

Electric control installation precautions

• Should be power off to operate.
• Open flame work is prohibited.
• The thermal line should be more than 15 cm away from the high temperature part of the engine, Otherwise, the temperature is high in summer, and it is easy to start.
• Please operate according to the wiring diagram of the fire extinguishing device, Otherwise, the wrong line may be connected.
• During the debugging process, please use a multi-meter to confirm the electric start terminal and feedback terminal; do the wire connection job after confirming it is correct, Please read the installation manual carefully before wiring.