বৈদ্যুতিক স্টার্ট অ্যারোসল ভিত্তিক স্বয়ংক্রিয় আগুন দমন সিস্টেম

The most features of this product is: it need to input small current to start, only a 3 volt of battery will be able to make it work, it have the following features:

• কাজ করা সহজ.
• ইনস্টল করা সহজ, DIY to install.
• Easy to suppress fire.
• CE certificated and GL certified, and with test reports to support.
• Not have residues and synthetic chemicals.
• Non conductive at high voltages.
• Non-harmful to sensitive electronics equipment.

Correspondingly , It widely be applied in the following areas:

• Wind turbines.
• Solar panel.
• Vehicle engine rooms.
• Engine room of vehicles and vessels.
• Machinery space.
• Electrical cabinet and control board.
• Kinds of computer room, data room, টেলিকমিউনিকেশন রুম.
• 5G energy storage base station.
• Electric car.
• EV scooter.
• Smart Home Devices.

For electric start, there is two different systems.

first one, the aerosol fire extinguishing device connect with a gas fire control panel, and the fire control panel connect with heat detector, স্মোক ডিটেক্টর, manual call point etc, we called it " aerosol connect with fire alarm systems", the start current is come out from the fire control panel.

Second one, the aerosol fire extinguishing device connect with a standalone thermal activation device, this thermal activation device also called "thermal activation generator", have functions of fire detection and output a small currrent to the aerosol device, we called it "aerosol connect with standalone thermal device".

The first one is a complete fire suppression system, and the second one is a simple system, to choose which is better is decided by which location in the production you are going to install.

Search for help please contact us engineers directly, বা E-MAIL US for help.

Aerosol system is belongs to dangerous cargo, it is always recognized as a gas based fire suppression system, below are matters need attention:

• Aerosol fire suppression device in airline transportation sea translation is classified as 4.1 dangerous goods, so it must packed into a special-made carton box or wooden case, and it must be inspected by customs before leaving export country.
• It must be stored in a dangerous goods warehouse, the warehouse shall be kept dry and ventilated.
• When doing system debugging or installation, make sure the power off, অন্য কথায়, make sure there is not have any current input to the aerosol device, otherwise the aerosol generator will be activated by mistake, and may hurt people at site.
• When aerosol agent is discharging, people should leave immediately or within 30 seconds delay time.
• After aerosol generator is releasing, do not touch the outer cylinder immediately because it is very hot.
• Do not stand directly in front of the device when do installation.
• Forbid to pierce the aluminum foil at the bottom of the device.

We are professional aerosol fire suppression system manufacturer, for further information or doubt, please contact us for help and discuss deeply.

there is Aerosol Fire Suppression PDF File for your download and reference.