PANGUNAHING PAGLALARAWAN
Lithium baterya ay isang maliit na electrical elemento, na gumagawa ng karamihan ng sunog extinguishing kagamitan sa merkado hindi upang tumugma sa ito, isang kumpanya na tinatawag na BLAZECUT pananaliksik out ng isang puting kulay sunog tube na maaaring punan sa HFC-227ea ahente o NOVEC1230 sa loob, ngunit bilang kanyang laki ay hindi bababa sa diameter 18mm*600mm, tila ito ay hindi rin isang magandang solusyon para sa tulad ng isang maliit na lithium-ion baterya proteksyon.
Hanggang sa taon 2020 ang aming aerosol compound QRR0.012G/S/SA ay inilathala, ang problema ng proteksyon ng apoy para sa lithium-ion baterya ay malutas.
QRR0.012G/S/SA ay spacial disenyo para sa lithium-ion compartment, ngunit din maaaring mag-aplay para sa ilang iba pang mga mas maliit na makitid na espasyo, tulad ng electrical cabinet at DB kahon atbp, dahil ito ay maliit na sapat na upang ilagay sa isang kahon ng baterya.
MGA PAGTUTUKOY AT PARAMETER
Sa ibaba namin ilista ang ilang mga pangunahing teknikal na data sheet ng QRR0.012G/S/SA- lithium baterya aerosol solusyon:
- Tipo: QRR0.012G/S/SA (Pananalita: 0.007, 0.02, 0.03, 0.04, 0.05, 0.06 magagamit din)
- Laki: diameter 40 mm, at taas ng 20 mm (Bilang bawat Manwal ng Instalasyon para sa QRR0.012G-S-SA).
- Hole Spacing Distansya para sa Pag-install: φ40.1*54.1 mm.
- Aerosol Concentration: ≤60g bawat kubiko metro.
- Proteksiyon na volyum: 0.2 kubiko metro.
- Aerosol Pakakanain Time: 4 Segundo.
- silindro kulay: Pula at iba pang espesyal na disenyo ng kulay.
- Namarkahan Temperatura ng Thermal Line: 175°C.
- Thermal line haba: 0.3 metro (cisang pinalawig na kahilingan sa customer).
- Electric cable haba: 0.3 metro (ay maaaring pinalawig bilang bawat kahilingan ng mga kliyente)
- Kasalukuyang Aktibasyon: ≥701 mA (Direktang Kasalukuyang Power Supply).
- Kaligtasan Kasalukuyang: ≤151mA (Direktang Kasalukuyang).
- Electric Start-up Time: tungkol sa 1 Pangalawa.
- Ambient temperatura saklaw: -50°C sa +95°C.
- Buhay Oras: 15 Taon.
- Warranty Time: 1 sa 2 Taon.
- Pagiging Tumutugma: maaari itong gumana sa apoy alarma at apoy pagtukoy sistema, lalo na maaaring tumugma sa gaseous alarma panel.
IBA PANG KATULAD NA MODELO MAGAGAMIT:
Aytem |
Taas sa mm |
Diameter sa mm |
Protektahan ang Volyum sa m³ |
Instalasyon |
QRR0.007G/S/SA |
40.00 |
20.00 |
0.1 |
sumasabog na mga eskrews at / o 3M pangkola |
QRR0.016G/S/SA |
60.00 |
22.00 |
0.25 |
sumasabog na mga eskrews at / o 3M pangkola |
QRR0.02G/S/SA |
60.00 |
25.50 |
0.30 |
sumasabog na mga eskrews at / o 3M pangkola |
QRR0.03G/S/SA |
60.00 |
25.50 |
0.50 |
sumasabog na mga eskrews at / o 3M pangkola |
QRR0.04G/S/SA |
99.00 |
27.50 |
0.60 |
sumasabog na mga eskrews at / o 3M pangkola |
QRR0.05G/S/SA |
99.00 |
27.50 |
0.80 |
sumasabog na mga eskrews at / o 3M pangkola |
QRR0.06G/S/SA |
99.00 |
27.50 |
1.00 |
sumasabog na mga eskrews at / o 3M pangkola |
Mag-klik dito para magbasa at mag-download QRR0.012G/S/SAATION MANUAL
This style of aerosol special design for lithium battery fire protection, as it is small in size, also can be applied in some other enclosure space,
it has its own particularity.
MGA TAMPOK
- Our skilled technician who is over 60 years old special design this product for lithium-ion battery, the product design is handsome and perfect.
- Aerosol na may maliit na sukat, lalo na ang taas ng aerosol ay tungkol sa 2 cm, maaaring magagawang upang i-install sa lithium baterya kahon.
- Aerosol kabilang sa malinis na extinguishing compound, walang natitira sa mga labi pagkatapos ng discharging, nito global warming potensyal na halaga at ozone layer pagkaubos potensyal na halaga ay halos zero, ay hindi makapinsala sa mga bahagi sa lithium baterya.
- Mataas na konsentrasyon, maliit na aerosol kalidad masakop malaking dami, ang magaan na timbang nito at pag save ng espasyo.
- Ito ay maaaring magkaroon ng signal feedback function, at aktibasyon function ay: thermal plus electric start-up.
- Maaari itong gumana sa isang stand-alone trigger device na tinatawag na "THERMAL ACTIVATION APARATO".
MGA APLIKASYON
- Maliit na sasakyan
- Malakas na kagamitan kabilang ang: loader, tagahukay, taktikal na pagsalakay / kaguluhan control, Bulldozer.
- Electric motorsiklo.
- Maliit na electric box.
- Maliit na electrical produkto.
- Lithium-ion baterya.
- Refrigerator.
- Washing machine.
- Air conditioner.
- Cable connector.
- 3D printers.
- Special army and police vehicles.
- Telecom tower schetters.
- Ventilation devices.
- Laser cuttings.
FIRE SUPPRESSION CLASS
- Class A fire-Solid Combustibles.
- Class B fire-Flammable Liquids.
- Class C fire-Flammable Gases.
- Class E fire-Electrical Appliances.
QRR0.012G/S/SA aerosol fire suppression device can suppress fire of Class A, B, C, E rapidly.
The device is suitable for ambient temperature of -50℃ to +95℃ (in short time can reach +125℃), most suitable for small enclosure space fire protection, such as small electrical cabinet/panel, coffer, lithium battery etc; it belongs to fixed type fire suppression system.
PAGGAWA NG PRINSIPYO
When the device get activation signal from the fire control panel or from the thermal cord, the aerosol compound inside the device is activated, then rapidly cause aerosol particles gas and the gas running out from the nozzle(side), to total flooding in the fire protection zone, to suppress the fire.
ATTENTION FOR TRAMSPORTATON AND STORE.
- Do not get close to heat source when it is being in transportation, store and installation, please avoid sunlight and rain.
- Do not use the product when the aerosol device’s outer shell is damaged.
- Do not disassemble the device without the permission of the manufacturer.
- People who enter the site must wear gas mask, in case of the aerosol device is being in discharging.
INSPECTION
- Please read carefully the installation manual before installation, and check the device and its accessories, install it after confirm of every components are good.
- Inspection Method:
- Appearance Inspection: check the appearance of the device, it should not drop paint, no indentation and no deformation, and accessories should be complete.
- The product has passed strict factory inspection, gayunpaman, the device and its accessories may be damaged due to various reasons during transportation; so when do installation, it is necessary to inspect each device according to above method.
INSTALLATION AND MAINTENANCE
- Take out the installation bracket of the aerosol device and fix it, there should be no obstacles between the aerosol device and the protective objectives. if necessary, the installer can install the auxiliary support also, the auxiliary support should be able to bear at least 5 times the weight of aerosol device, to make sure the aerosol device is firmly installed.
- When installation, you need to consider avoid high temperature areas above 95℃. there should be no obstacles within 0.1m in diameter of the aerosol device.
- Do not disassemble the device without the permission of the manufacturer.The thermal cord should be arranged along where the fire perhaps will occurs; it is forbidden to install it at the high temperature pipelines, in case of be activated by mistake.
- After releasing, the cylinder of aerosol device is super hot with high temperature, so it is forbidden to touch it, wait until it cools down before you can handle it.
- During its valid time, it is no need to hold yearly quality inspection; The cylinder of the aerosol device needs to be regularly cleaned of dust and dirty according to the actual situations; if it is found to be deformed or damaged, it should be replaced in time; Regularly check wiring for open circuit, short circuit and resistance value of the ignition device and keep records.
- Ang mga kaugnay na pagkalugi na sanhi ng abnormal na pag install, pagpapanatili at paggamit ay hindi sa loob ng saklaw ng warranty ng kumpanya.