Estintore aerosol di forma circolare per inverter solare ibrido

Whether the product is good or not can be seen from its functions and features, So how about inverter aerosols? Let's make a list below:

• Round shape with small dimension, It can squeeze into any small space.
• There is 3M adhesive at the bottom. Simply tear off the protective film of the adhesive and stick it in the inverter to complete the installation work. The installation is so simple!
• There are two small installation holes on the left and right sides of the product, so you can also choose to install it with screws yourself.
• Multiple startup methods for you to choose, either electric start or thermal activation.
• The fire extinguishing agent is clean and will not harm any electronic components or precision equipment, so there is no need to worry that its spraying will affect the performance of the inverter.
• The fire extinguisher does not carry any pressure, you can move and handle it freely, and you can also operate and use it according to the instructions with confidence.
• The product has a nozzle on the side, which can quickly spray chemicals, with a long spraying distance and strong spraying ability, and can extinguish fires in a short time.
• The product is not only automatic, but can also be manually started. It can also be started in conjunction with other products and can be paired with an alarm system.
• Due to the characteristics of aerosol agents, their service life can reach up to 10 anni.

Compared to 8g, 10g, and 12g aerosols, 20g has a better fire extinguishing coverage area, It can extinguish a space fire of approximately 0.3 metri cubi, Pertanto, it is very suitable for installation on photovoltaic inverters.

Let's list its main application areas below:

• Solar Panels.
• Solar inverter.
• Wind power electrical cabinets and control panel.
• Switch-gear.
• Lithium battery pack.
• Scatola del contatore.
• Power discharge cabinet.
• Express delivery cabinet.
• Uninterruptible power supply.
• Electric vehicles, includere: E-bike, E-motor and E-bycycle.
• Power exchange cabinet.
• Car, bus and truck engine.
• Refrigerator motor.
• Computer host box.
• Power charge station.
• Electrochemical energy storage power station.

The installation of fire extinguishers has the following precautions:

• Please turn off the power supply of the inverter during installation to avoid personal injury.
• Installed in an open position in the inverter.
• Read the user manual before installation to clarify how to install.
• To understand clearly how to do wiring and how to debug the system, If you don't understand anything, you should consult relevant technical personnel.
• If you need to conduct a fire extinguishing agent spraying test, remember to stay away from a distance of more than 3 meters when spraying.