Datortelpas servera plaukts aerosola ugunsgrēka novēršanas sistēma

LĪDZEKĻI

An old technician in our workshop design out this style of aerosol device, which is similar like a external machine of air conditioner, His design was inspired by air conditioning, we all admire him.

Get back to the point, the features as follow:

• It should be installed in enclosure space, not in open area.
• It should use in those space range from 30 līdz 2000 kubikmetri, and over 2000m3 you would better use a FM200 fire protection system.
• It is clean product, do not worry about that it will do any damage to your machinery and equipment.
• It leaves no residue after spraying, do not require you to sweep the room.
• It is with a special cooling technology, so when it releasing the aerosol outlet temperature is not very hot.
• It is a non-piping system, and do not worry about the problem of leakage.
• Life span over 7 līdz 10 Gadiem, and during its service time, people do not need to do any maintenance on it.
• Pass the fire test and inspection test from China official research institute, and get CE certificate for approval.
• Do not require you to install it with any tools, just place it on the floor in the room.

APPLICATIONS

• High-rise Buildings.
• Power Distribution Room.
• Library Room.
• Archives Room.
• Reference Room.
• Storage Room.
• Telecommunication Room.
• Computer Rooms.
• Communication Stations.
• Railway Stations.
• Distribution Ark.
• Data Processing.
• Remote Control.
• Train Locomotive.
• High Mobile Equipment Machine Room.
• Signal Station Room.
• Data Base Room.

RESTRICTED APPLICATION

This device not be able to apply in the following fields:

• Chemical Substance which can be oxidized rapidly without air.
• Active Metal.
• Spontaneous Combustion Substance.
• Metal Hydroxide.
• Strong Oxidant.

ATTENTION FOR PRODUCT INSTALLATION

• The installation job should be done by a professional person or skilled technician.
• The device better installed near the wall.
• The device should not be installed near wind, vent, door, window and other opening outlet.
• Do not install it in a place where easy to get rain and water.
• Do not install it near source of fire flame.
• Do not install in evacuation exit.
• Do not install it in a place where easy to get shocked, impacted and corrosion.
• Mechanical ventilation equipment should be set at a underground pipe gallery or place without windows.
• The device's activation wire better use twisted pair wire, or use dual-core metal shielded wire and the wire size better is 1.5 mm2.

ATTENTION FOR USE

Please read our instruction manual carefully before installation.

• The job of installation and system commissioning must be done by a skilled personnel.
• After installation, do not move the device easily.
• In case of fire, personnel at site should leave immediately, and before leave please close the doors and windows as possible as you can.
• The life span of this device is 7 years normally, after the service life time, please consider to replace it with a new one.
• After releasing, don't touch the cylinder, because it is too hot, after cool down please wear gloves to move it.
• In case of any accident, please do not dismantle the device without permission from the manufacturer or authorized agent.
• The standby power of fire alarm system is forbidden to charge continuously for 24 hours, and the standby power should be replaced every 4 Gadiem.
• The inspector should check the fire alarm system yearly and keep record, but do not need to check this device yearly.
• Before put in use, the installer should make sure that the power is off, in case of any device activated by mistake.

TRANSPORTATION AND STORAGE

• Handle with care during its transportation.
• Store the device at a ventilated and dry warehouse.

AFTER SALES SERVICE

• Garantijas laiks: 1 līdz 2 years based on manufacturing date.
• Any technician question and doubt please feel free to inquiry from us.
• After sale we can teach you how do install and how to do system debugging.