APRAKSTS PAR DŪMU DETEKTORU
Dūmu detektora modeļa numurs ir: AW-CSD381, tā pilnais nosaukums ir “parastais fotoelektroniskais dūmu detektors”, tas izmanto modernu optiskās izpētes kameru, tas ir paredzēts iekštelpu aizsardzībai, can work with fire control panel AW-GEC2169 and AW-CFP2166, the detector that initiate the alarm condition will have its red LED and relays latched until reset by the fire control panel.
Galvenie parametri un datu lapa:
- Modeļa numurs: AW-CSD381.
- Lielums: 9.95*9.95*4.82 Cm.
- Svars: par 115.00 Grami.
- Baterija: bez.
- Galvenais spriegums: 24 VDC vai 12 VDC.
- Darbības strāva: monitoringa statuss ≤120uA, Trauksmes statuss ≤15mA.
- Elektroinstalācijas: Zona+ un zona-, solījums par divām autobusu sistēmām.
- Aizsardzības klase: IP 30.
- Dūmu detektora jutība: 0.1 līdz 0.15 dB uz metru.
- Sakars: Nē. 5 ir zonas ievade+; Nē. 6 ir zonas ievade -, Nē. 2 ir releja izvade NO; Nē. 3 ir releja izvade COM.
- Releja izvades vērtība: 0.5A at 24 VDC.
- Vides: A klases temperatūras diapazons no -10 līdz +50°C.
- Relatīvais mitrums: ≤95% RH, bez kondensāta.
- Pārošanās ugunsdrošības panelis: AW-CFP2166, AW-GEC2169.
- Lietojumprogrammu: lietošanai telpās.
APRAKSTS PAR SILTUMA DETEKTORU
Siltuma detektora apraksts ir gandrīz tāds pats kā dūmu detektors, atšķirība ir tāda, ka siltuma detektors ir noskaidrot ugunsgrēku, uztverot temperatūru ugunsbīstamībā.
Galvenie parametri un datu lapa šādi:
- Krājuma kods: AW-CTD382.
- Dimensiju: 99.5*99.5*4.82 Mm.
- Produkta svars: 100 Grami.
- Atribūts: Siltuma noteikšana.
- Sakars: tāds pats kā dūmu detektors.
- Releja izeja: 0.5A @24 LĪDZSTRĀVA.
- Gaidstāves strāva: mazāk nekā 120uA.
- Maksimālā trauksmes strāva: Mazāks 15 Ma.
- Elektroinstalācijas stāvoklis: Tāds pats kā dūmu detektors.
- Fiksējiet temperatūras trauksmi: 57°C A2R.
- Pieauguma trauksmes ātrums: 7.1°C/5 sekundes, A2R.
- Apkārtējā temperatūra: -10 līdz +60°C.
- Relatīvais mitrums: 5% līdz 95% RH, bez kondensāta.
- Krāsa un materiāli: Balta ABS plastmasa.
- Atbilstošais resursdators: AW-GEC2169, AW-CFP2166.
Till present, many trading and contracting companies, and construction and engineering companies like to buy from us directly, their projects in need of kinds of fire suppression systems and fire alarm systems according to their project requirement, most of them send us the drawings in .dwg or .pdf to help design for them.
COMPATIBILITY DESCRIPTION
No matter smoke detector or heat detector, they all belongs to the detection system, they normally work together with fire alarm control panel to form a complete fire alarm system.
In a fire protection room, both need smoke detectors and heat detectors.
in case the smoke detector sensing out fire, it will send signal to fire control panel; and if the heat detector find out fire, it also will send signal to the fire control panel, Both of them work together to better identify fires, so that the controller can take measures accurately.