Sinal de alerta de liberação de gás também nomeado “indicador de liberação de gás”, ela é uma parte necessária de sistema automático de controle de extinção de gás quando é ativado, ele exibe ” gás está liberando, não entrar” no painel LED.
Ele tem seguintes especificações:
- Nome: Indicador de liberação de gás.
- Modelo: AW-GRS2158.
- Tensão: DC24V/AC24V não polarizado.
- Corrente de trabalho: ≤70 mA @24 VDC.
- Peso único: 100 Gramas.
- Período flash: 1.2-1.5 Segundos.
- Método de fiação: 2 fio de ônibus.
- Faixa de temperatura: -10°C a +50°C.
- Umidade relativa do ar: 0-95%.
- Certificação: EN54-2, EN54-4 e EN12094-1.
- Tempo de garantia: 1 Para 2 Anos.
- Informações de embalagem: Saco de PVC e caixa de caixa de exportação padrão.
CARACTERÍSTICAS
Every product have its own features, and this gas releasing warning sign also have:
- It is installed above the entrance and exit of gas fire extinguishing protection area.
- Light indication before gas release, And the indicator panel has warning signs in English, Remind site personnel not to enter the gas fire protection area.
- Directly connected to gas fire extinguishing controller, and can connect with input and output module.
- Low power consumption.
- Electronic coding mode, direct debugging with handheld electronic encoder.
APLICATIVOS
its mainly application fields as follow:
- Hotel.
- Restaurant.
- Computer room.
- Generator room.
- Bank and financial department.
- Super-market.
- Warehouse.
- Museums.
- Art Gallery.
- Office Building.
When the fire alarm system start to work, the indicator lamp showing" gás está liberando, não entrar" flashes at an interval of 1.5 Segundos, used to indicate that gas spraying is in progress.
There are several points for attention, please read below information:
- This product is a fire-fighting product. It must strictly implement the duty and shift system during use, and make operation records.
- After the it is put into operation, it shall be checked regularly, and it is recommended to conduct a function test at least every half a year.
- After the it is put into operation, it shall be checked regularly, and it is recommended to conduct a function test at least every half a year.
- The package should be intact, and please do not squeeze it during transportation.