Sistemul automat de stingere automată a incendiilor bazat pe aerosoli electrici adoptă o priză de aviație din material de aluminiu pentru a conecta corpul de aerosoli cu sursa de alimentare CU CURENT ALTERNATIV 3 spre 220 Volt, sau DC 3 spre 24 Volt, este necesar doar un mic curent pentru a porni dispozitivul, deci, uneori, oamenilor le place să utilizeze un dispozitiv independent de activare termică pentru a porni automat dispozitivul de aerosoli.
Pornirea electrică este modul clasic de a porni dispozitivul de aerosoli să funcționeze, din acest motiv, uneori generatoarele de aerosoli sunt considerate aparate de incendiu, deci este un produs foarte important pentru protecția împotriva incendiilor.
Principalii parametri ai acestui stil de produse sunt enumerați după cum urmează:
- Atributele produsului: Sistem automat de stingere a incendiilor pe bază de aerosoli, instrument de stingere a incendiilor.
- Model și capacitate: variază de la 20 grame la 3000 Grame, detalii se referă la MANUAL DE INSTALARE.
- Concentrația proiectată: Mai puţin 100 gram pe metru cub.
- Spațiu de acoperire: 0.2 spre 30 m3 spațiu închis.
- Materialul cilindrului exterior și interior: 304 oțel inoxidabil.
- Material distanțier: Oțel carbon.
- Materialul sistemului de răcire: Microsferă ceramică.
- Material noozle: 304 oțel inoxidabil.
- Priza de aviație: material din bronz sau aluminiu.
- Distanța de descărcare: 3 spre 5 Metri.
- Timpul de eliberare: Mai puţin 1 Minute.
- Instrumente de instalare: paranteză, șuruburi și adeziv 3M.
- Durata de viață a produsului: 10 spre 15 Ani, conform testului său de îmbătrânire.
- Compatibilitate electromagnetică: Da.
- Ecologic: Da.
- Standardul Părintelui Executiv: GA499.1-2010.
- Relativă Grand-tatăl Standard: UL 2775, ISO15779:2011, NFPA 2010, CEN/TR 15276
The most features of this product is: it need to input small current to start, only a 3 volt of battery will be able to make it work, it have the following features:
- Easy to operate.
- Easy to install, DIY to install.
- Easy to suppress fire.
- CE certificated and GL certified, and with test reports to support.
- Not have residues and synthetic chemicals.
- Non conductive at high voltages.
- Non-harmful to sensitive electronics equipment.
Correspondingly , It widely be applied in the following areas:
- Wind turbines.
- Solar panel.
- Vehicle engine rooms.
- Engine room of vehicles and vessels.
- Machinery space.
- Electrical cabinet and control board.
- Kinds of computer room, data room, camera de telecomunicatii.
- 5G energy storage base station.
- Electric car.
- EV scooter.
- Smart Home Devices.
For electric start, there is two different systems.
first one, the aerosol fire extinguishing device connect with a gas fire control panel, and the fire control panel connect with heat detector, detector de fum, manual call point etc, we called it " aerosol connect with fire alarm systems", the start current is come out from the fire control panel.
Second one, the aerosol fire extinguishing device connect with a standalone thermal activation device, this thermal activation device also called "thermal activation generator", have functions of fire detection and output a small currrent to the aerosol device, we called it "aerosol connect with standalone thermal device".
The first one is a complete fire suppression system, and the second one is a simple system, to choose which is better is decided by which location in the production you are going to install.
Search for help please contact us engineers directly, sau E-MAIL US for help.
Aerosol system is belongs to dangerous cargo, it is always recognized as a gas based fire suppression system, below are matters need attention:
- Aerosol fire suppression device in airline transportation sea translation is classified as 4.1 dangerous goods, so it must packed into a special-made carton box or wooden case, and it must be inspected by customs before leaving export country.
- It must be stored in a dangerous goods warehouse, the warehouse shall be kept dry and ventilated.
- When doing system debugging or installation, make sure the power off, cu alte cuvinte, make sure there is not have any current input to the aerosol device, otherwise the aerosol generator will be activated by mistake, and may hurt people at site.
- When aerosol agent is discharging, people should leave immediately or within 30 seconds delay time.
- After aerosol generator is releasing, do not touch the outer cylinder immediately because it is very hot.
- Do not stand directly in front of the device when do installation.
- Forbid to pierce the aluminum foil at the bottom of the device.
We are professional aerosol fire suppression system manufacturer, for further information or doubt, please contact us for help and discuss deeply.
there is Aerosol Fire Suppression PDF File for your download and reference.
Instrument benefic de stingere a incendiilor pentru mașinile de construcții încărcătoare pe roți