China Top zece întreprinderi în industria de protecție împotriva incendiilor și de securitate
EnglishবাংলাБългарскиΕλληνικάItalianoLatīnaLatviešu valodaLietuvių kalbaPortuguêsRomânăSlovenčinaEspañolBasa SundaKiswahiliWikang Filipino
» Aerosoli chimice sisteme automate de stingere a incendiilor » Sistem de suprimare a aerosolilor cu senzor de bec din sticlă în spațiu închis Protecție împotriva incendiilor a dulapului electric
  • Bec de sticlă Sensing Aerosol Suppression System în spațiu închis cabinet electric de protecție împotriva incendiilor

    Germania Quality Grade Job Glass Bulb Thermo Head Trigger Aerosol Suppression System, un sistem autonom pentru protecția împotriva incendiilor în spații mici în diverse industrii.

    Zona de acoperire:Din 0.2 spre 57 spațiu de metri cubi.

     

    • Descriere:__________
    • Caracteristici și aplicații
    • Informații suplimentare
    • Alte precauții

    DESCRIERE DE BAZĂ

    Aerosolul de detectare a becului de sticlă este, de asemenea, numit “aerosol temperatură bec termic”, Avem brevet pentru capul becului de sticlă, care este o componentă specială pentru care îl folosim pentru a porni corpul aerosolului.
    Capul cu bec termic este un design special realizat de tehnicianul nostru, becul de sticlă de pe capul becului termic este marca JOB din Germania, becul de sticlă JOB are temperatura nominală de 57°C, 68°C,79°C, 93°C în mod normal, Elementul de detectare a becului din sticlă este de calitate superioară, deoarece este din Germania.

    La fel ca cel de tip cablu termic, the thermo glass bulb type aerosol is also an automatic and temperature sensing system, so it also can work stand-alone, and do not requires any outer power supply to activate the aerosol generator, what you do is just install the thermo bulb head on the top of minisol aerosol body and screw it.

    Its particularity is similar with thermal line aerosol one, but a bit difference:

    • It use glass bulb as temperature sensing element, glass bulb temperature is normally 57℃, 68°C, 79°C, 93°C, 141°C, 182°C, 260°C.
    • Working principle of the glass bulb head: when the glass bulb sensing out ambient temperature reach its rated temperature, the glass bulb will broken automatically, and then the firing pin in the thermo head will hit the small copper core on the top of aerosol body and cause a tiny momentary current, and finally to activate the aerosol body to suppress.
    • It is also automatic to work and stand-alone, not require any input current.
    • Install in small space for fire protection, de exemplu: dulapul electric.
    • It is much more easier to install than that of thermal cord line, because thermal line type require cable ties, but its no need that.
    • It also aerosol based with design density of 100 gram pe metru cub, so it is very highly effective.

    SPECIFICAȚII ȘI PARAMETRI

    Thermo bulbs aerosol is taken as the world’s DIY Installation Systems, because any adults people can install it easily, it have below specifications and main parameters:

    • Name of Product: Thermo Glass Bulbs Type Stand-alone Aerosol Suppression System.
    • Numărul modelului: AW-QH-***. ( “***” could be 20ST, 30ST, 60ST, 100ST, 150ST, 200ST, 250ST, 300ST, 500ST, 750ST, 1000ST, 1500ST, 2000ST, 2500ST, 3000ST, 3500ST, 4000ST, 4200ST, 5700ST).
    • Aerosol Extinguishing Agent Quality: variază de la 20 grame la 5700 Grame.
    • Design Density: 0.1 kilograms per cubic meters.
    • Protective Area: variază de la 0.20 spre 57.00 Metri cubi.
    • Mod de activare: Thermo bulbs, glass bulbs, temperature sensing, thermal sensing.
    • Dimensions of The Product: As per theAware Fire Mini Aerosol Installation Manual“.
    • Discharging Time: Mai puţin 60 Secunde, check our “Fisa tehnica”.
    • Weight of The Product: Range from 0.3 spre 28 Kilograme.
    • Cylinder Materials: 304 stainless steel with round shape, include installation brackets, screws and support.
    • Glass bulb rated temperature: 57°C (orange colour), 68°C (red colour), 79°C (yellow colour), 93°C (green colour) etc.
    • Umiditate relativă: 95%.
    • Timp ambiental: -50°C până la +108°C.
    • Surface temperature of aerosol housing: mai mică de 100°C.
    • Outlet temperature of aerosol housing: less than 200℃.
    • Service life time: cel puțin 10 Ani, și poate ajunge 15 Ani. according to the aging test.
    • Timp de garanție: cel puțin 1 an.
    • Standard executiv: GA499.1-2010, ISO15779, CEN15276, NFPA2010, UL2775.

    CARACTERISTICI

    Thermo bulbs aerosol adopts a only 3mm diameter of Job glass bulb as temperature sensing element, this product is compact and have below features:

    • Small in size, very compact, space saving and light weight.
    • Valoarea ODP este zero, GWP value is zero, and ALT value is zero, it is eco-friendly and clean product.
    • Stand-alone system, can start the aerosol generator separately.
    • Sistemul de aerosoli este un sistem fără conducte, și funcționează fără nici o presiune.
    • Fumul de aerosoli este ceață albă, După câteva minute se va termina, nu lasă reziduuri după eliberare.
    • 304 oțel inoxidabil, IP67 impermeabil și rezistent la praf.
    • Raport internațional certificat și de testare pentru a sprijini.
    • Sunt disponibile diferite temperaturi de pornire, de la 57°C la 260°C.
    • Becul de sticlă este importat din Germania, brandul este JOB, care este o întreprindere foarte renumită, care este o profesie în produce becuri de sticlă, Deci, calitatea produsului este excelentă.

    APLICAŢII

    Poate fi utilizat într-un număr foarte mare de industrii, Mai jos numărăm câteva:

    • Dulap electric în fiecare industrie.
    • Turbină eoliană.
    • Automobile și vehicule.
    • Sistem de stocare a energiei.
    • Viteză autostradă și tren.
    • Utilaje miniere.
    • Utilaje agricole.
    • Instrumente de fabricație.
    • Mașină de vopsit.
    • Sala de calculatoare din Instituție financiară.
    • orice alt spațiu închis sau semiînchis.

    CONDIȚII DE PLATĂ ȘI LIVRARE

    Payment Terms: L/C, T/T, Money Transfer, PayPal, Uniunea Vestică.

    Delivery: 3 spre 7 days for small and sample order; 7 spre 15 days for bulk order.

    PACKAGE

    • Put each of the product into PP bag.
    • And put into poly-foam.
    • Inner is a white color of colour box.
    • and then every four or one colour box put into a brown big carton box.
    • Finally hundreds of the cargo together packed into a fumigation wooden case.

    INSTALARE ȘI ÎNTREȚINERE

    strictly as per our INSTALLATION MANUAL.

    OTHER MATTERS

    • Păstrați-l într-un loc uscat și ventilat.
    • Când se eliberează, people should leave the site immediately, or move far away from the device.
    • Do not touch the round cylinder surface after it is releasing, because it is super hot, wait until at least 30 minutes after it cools down.
    • Do not disassemble the device without permission at any time.
    • După eliberare, you'd better replace a new one in time.

    Formular de solicitare ( vă vom primi înapoi cât mai curând posibil )

    Nume:
    *
    E-mail:
    *
    Mesaj:

    Verificare:
    1 + 7 = ?

    Poate vă place, de asemenea,

  • DE CE SĂ NE ALEGEȚI PE NOI

    Suntem un ISO 9001, ISO14001, Iso18001 producător certificat specializat în sistemul de stingere a incendiilor pentru un deceniu de ani, folosim materiale de cea mai bună calitate pentru a produce produsele și toate acestea au trecut strict de inspecția QC înainte de a părăsi fabrica, cele mai multe dintre produsele noastre au primit certificate și aprobări de CE, RHOS, IP67, GL, Limba chineză de test Raport de la Institutul China.

  • CONTACTATI-NE

    Jiangxi Aware Fire Technology Co, Ltd

    Adresă: Număr 112, Districtul Yushui, Orașul Xinyu, Provincia Jiangxi, Republica China.

    Tel: 0086-0790-6000119
    Fax: 0086-0790-6001119
    E-mail: sales@chinafiresuppresion.com
    Https://www.awarefire.com
    Https://aerosolfire.com
    Https://www.aerosolfireextinguisher.com
    Https://www.chinafiresuppression.com