Čína Top 10 podnikov v oblasti požiarnej ochrany a bezpečnosti
EnglishবাংলাБългарскиΕλληνικάItalianoLatīnaLatviešu valodaLietuvių kalbaPortuguêsRomânăSlovenčinaEspañolBasa SundaKiswahiliWikang Filipino
» Aerosólové chemické automatické protipožiarne systémy » Lithium-ion Battery Fire Protection Systems-Aerosol Compound
  • Lítium-iónová batéria protipožiarne systémy-aerosólová zlúčenina

    Extinguishing Chemical-Aerosol Compound, Details refer to our Material Safety Data Sheet, aerosol based is a better lithium-ion batteries fire suppression solution, which is better than BLAZECUT.

    We are the first manufacturer which engage, research and develop aerosol system for lithium battery, we have rich experience to produce them.

    for a complete solution with specific design, please feel free to Kontaktujte nás directly.

     

    • Popis
    • Funkcie a aplikácia
    • Ďalšie informácie
    • Ďalšie preventívne opatrenia

    ZÁKLADNÝ POPIS

    Lítiová batéria je malý elektrický prvok, čo spôsobuje, že väčšina hasiacich zariadení na trhu nie je schopná vyrovnať sa mu, spoločnosť s názvom BLAZECUT skúma bielu farebnú detekciu požiaru, ktorá by mohla byť naplnená činidlom HFC-227ea alebo NOVEC1230 vo vnútri, ale keďže jeho veľkosť je najmenej 18mm*600mm, zdá sa, že to tiež nie je dobré riešenie pre takú malú protipožiarnu ochranu lítium-iónovej batérie.

    Až do roka 2020 naša aerosólová zlúčenina QRR0.012G/S/SA bola publikovaná, problém požiarnej ochrany lítium-iónovej batérie je dobre vyriešený.

    QRR0.012G/S/SA je špecializačný dizajn pre lítium-iónový priestor, ale môže sa uchádzať aj o iný menší úzky priestor, ako elektrická skrinka a DB boxy atď., pretože je dostatočne malý na to, aby sa dal vložiť do krabice s lítiovou batériou.

    ŠPECIFIKÁCIE A PARAMETRE

    Nižšie uvádzame niektoré hlavné technické údaje QRR0.012G/S/SA- Aerosólové riešenie lítiových batérií:

    • Typ: QRR0.012G/S/SA (Poznámka: 0.007, 0.02, 0.03, 0.04, 0.05, 0.06 k dispozícii aj)
    • Veľkosť: priemer 40 Mm, a výška 20 Mm (Podľa návodu na inštaláciu pre QRR0.012G-S-SA).
    • Vzdialenosť rozstupov otvorov pre inštaláciu: φ40.1*54.1 mm.
    • Koncentrácia aerosólu: ≤60 g na meter kubický.
    • Ochranný objem: 0.2 Kubických.
    • Aerosól uvoľnenie času: 4 Sekúnd.
    • Farba valca: Červená a iná špeciálna dizajnová farba.
    • Menovitá teplota tepelného vedenia: 175°C.
    • Dĺžka tepelného vedenia: 0.3 merač (cpredĺženie na žiadosť zákazníka).
    • Dĺžka elektrického kábla: 0.3 merač (Je možné rozšíriť na žiadosť klientov)
    • Aktivačný prúd: ≥701 mA (Napájanie jednosmerným prúdom).
    • Bezpečnostný prúd: ≤151mA (Jednosmerný prúd).
    • Elektrický čas spustenia: o 1 Sekunda.
    • Teplotný rozsah okolia: -50°C až +95°C.
    • Životný čas: 15 Rokov.
    • Záručná doba: 1 do 2 Rokov.
    • Kompatibilita: môže pracovať s požiarnym alarmom a systémom detekcie požiaru, najmä sa môže zhodovať s plynným požiarnym alarmovým panelom.

    ĎALŠÍ PODOBNÝ MODEL, KTORÝ JE K DISPOZÍCII:

    Položka Výška v mm Priemer v mm Ochranný objem v m³ Inštalácia
    QRR0.007G/S/SA 40.00 20.00 0.1 vybuchujúce skrutky a/alebo 3M lepidlo
    QRR0.016G/S/SA 60.00 22.00 0.25 vybuchujúce skrutky a/alebo 3M lepidlo
    QRR0.02G/S/SA 60.00 25.50 0.30 vybuchujúce skrutky a/alebo 3M lepidlo
    QRR0.03G/S/SA 60.00 25.50 0.50 vybuchujúce skrutky a/alebo 3M lepidlo
    QRR0.04G/S/SA 99.00 27.50 0.60 vybuchujúce skrutky a/alebo 3M lepidlo
    QRR0.05G/S/SA 99.00 27.50 0.80 vybuchujúce skrutky a/alebo 3M lepidlo
    QRR0.06G/S/SA 99.00 27.50 1.00 vybuchujúce skrutky a/alebo 3M lepidlo

     

    Kliknite sem a prečítajte si a stiahnite si QRR0.012G/S/SA NÁVOD NA INŠTALÁCIU

    This style of aerosol special design for lithium battery fire protection, as it is small in size, also can be applied in some other enclosure space,

    it has its own particularity.

    FUNKCIE

    • Our skilled technician who is over 60 years old special design this product for lithium-ion battery, the product design is handsome and perfect.
    • Aerosol with small dimension, especially the height of aerosol is about 2 centimeter, could be able to install in lithium battery boxes.
    • Aerosol belongs to clean extinguishing compound, it leaves no residue after discharging, its global warming potential value and ozone layer depletion potential value is almost zero, will not damage the components in the lithium battery.
    • Highly concentration, small aerosol quality cover large volume, its light weight and space saving.
    • It could have signal feedback function, and activation function is: thermal plus electric start-up.
    • It can work with a stand-alone trigger device called "THERMAL ACTIVATION DEVICE".

    APLIKÁCIE

    • Small vehicles
    • Heavy equipment including: loader, excavator, tactical assault/riot control, bulldozer.
    • Electric motorcycle.
    • Small electric box.
    • Small electrical products.
    • Lithium-ion batteries.
    • Refrigerator.
    • Washing machine.
    • Air conditioner.
    • Cable connector.
    • 3D printers.
    • Special army and police vehicles.
    • Telecom tower schetters.
    • Ventilation devices.
    • Laser cuttings.

    FIRE SUPPRESSION CLASS

    • Class A fire-Solid Combustibles.
    • Class B fire-Flammable Liquids.
    • Class C fire-Flammable Gases.
    • Class E fire-Electrical Appliances.

    QRR0.012G/S/SA aerosol fire suppression device can suppress fire of Class A, B, C, E rapidly.

    The device is suitable for ambient temperature of -50℃ to +95℃ (in short time can reach +125℃), most suitable for small enclosure space fire protection, such as small electrical cabinet/panel, coffer, lithium battery etc; it belongs to fixed type fire suppression system.

    PRACOVNÁ ZÁSADA

    When the device get activation signal from the fire control panel or from the thermal cord, the aerosol compound inside the device is activated, then rapidly cause aerosol particles gas and the gas running out from the nozzle(side), to total flooding in the fire protection zone, to suppress the fire.

    ATTENTION FOR TRAMSPORTATON AND STORE.

    • Do not get close to heat source when it is being in transportation, store and installation, please avoid sunlight and rain.
    • Do not use the product when the aerosol device’s outer shell is damaged.
    • Do not disassemble the device without the permission of the manufacturer.
    • People who enter the site must wear gas mask, in case of the aerosol device is being in discharging.

    INSPECTION

    • Please read carefully the installation manual before installation, and check the device and its accessories, install it after confirm of every components are good.
    • Inspection Method:
      • Appearance Inspection: check the appearance of the device, Nemala by spadnúť farba, žiadne odsadenie a deformácia, a príslušenstvo by malo byť kompletné.
      • Výrobok prešiel prísnou továrenskou kontrolou, však, zariadenie a jeho príslušenstvo sa môže počas prepravy z rôznych dôvodov poškodiť; tak kedy sa inštaluje, Je potrebné skontrolovať každé zariadenie podľa vyššie uvedenej metódy.

    INŠTALÁCIA A ÚDRŽBA

    • Vyberte inštalačnú konzolu aerosólového zariadenia a upevnite ju, Medzi aerosólovým zariadením a ochrannými cieľmi by nemali byť žiadne prekážky. v prípade potreby, Inštalatér môže nainštalovať aj pomocnú podporu, pomocná podpera by mala byť schopná uniesť aspoň 5 krát hmotnosť aerosólového zariadenia, aby ste sa uistili, že aerosólové zariadenie je pevne nainštalované.
    • Pri inštalácii, musíte zvážiť, či sa vyhnite oblastiam s vysokou teplotou nad 95 °C. there should be no obstacles within 0.1m in diameter of the aerosol device.
    • Do not disassemble the device without the permission of the manufacturer.The thermal cord should be arranged along where the fire perhaps will occurs; it is forbidden to install it at the high temperature pipelines, in case of be activated by mistake.
    • After releasing, the cylinder of aerosol device is super hot with high temperature, so it is forbidden to touch it, wait until it cools down before you can handle it.
    • During its valid time, it is no need to hold yearly quality inspection; The cylinder of the aerosol device needs to be regularly cleaned of dust and dirty according to the actual situations; if it is found to be deformed or damaged, it should be replaced in time; Regularly check wiring for open circuit, short circuit and resistance value of the ignition device and keep records.
    • The related losses caused by abnormal installation, maintenance and use are not within the scope of the company's warranty.

     

    Formulár na začatie zisťovania ( Ozveme sa vám čo najskôr )

    Meno:
    *
    E-mail:
    *
    Správa:

    Overenie:
    0 + 5 = ?

    Možno sa vám tiež páči

  • PREČO SI VYBRAŤ NÁS

    Sme ISO 9001, ISO14001, Certifikovaný výrobca ISO18001 sa špecializuje na protipožiarny systém po dobu desiatich rokov, na výrobu výrobkov používame špičkovú kvalitu materiálu a všetky z nich prešli striktnou kontrolou QC pred odchodom z továrne, väčšina našich produktov má certifikáty a approvlas CE, RHOS, IP67, GL, Správa o čínskom jazyku testov z Čínskeho inštitútu.

  • KONTAKTUJTE NÁS

    Jiangxi Aware Fire Technology Co., Ltd

    Adresa: Číslo 112, Okres Yushui, Mesto Xinyu, Provincia Ťiang-si, Čínska republika.

    Tel: 0086-0790-6000119
    Fax: 0086-0790-6001119
    E-mail: sales@chinafiresuppresion.com
    Https://www.awarefire.com
    Https://aerosolfire.com
    Https://www.aerosolfireextinguisher.com
    Https://www.chinafiresuppression.com