POJEM
HFC-227ea je technický názov., a jeho celé meno je “heptafluoropropane”, Jedná sa o bezfarebné, Bez zápachu halo-uhlík, Zakladateľ Dupont pre neho pomenoval iný obchodný názov s názvom ” FM200″, Keď hovoríme o systéme FM200, je to HFC-227ea čistý prostriedok protipožiarneho systému.
PRACOVNÝ PRINCÍP SYSTÉMU
HFC-227ea clean agent clean agent protipožiarny systém je plynový celkový protipovodňový systém pre veľkú vesmírnu požiarnu ochranu, napríklad: počítačová miestnosť, dátové centrum, spínací prevod, serverovňa atď..
Zvyčajne pracuje s úplne požiarnymi poplašnými systémami, Keď dôjde k požiaru v chránenom území, Detektory tepla a detektory dymu zistia, že došlo k požiaru, potom vyšle požiarny signál na protipožiarny ovládací panel, protipožiarny ovládací panel potom vydá pokyny na požiarnu signalizáciu a indikátor uvoľňovania plynu, alarmujúci alarm a blikajúci indikátor uvoľňovania plynu, po 30 sekundové oneskorenie protipožiarneho systému HFC-227ea začne automaticky úplne zaplavovať požiar.
ÚDAJOVÝ HÁROK A PARAMETRE
- Objem valcov: 70L, 90L, 100L, 120L, 150L, 180L.
- Koncentrácia naplnenia: ≤1,08 kilogramu za liter.
- Plniaci tlak: 4.2 Mpa alebo 5.6 Mpa.
- Sila: Hlavný výkon 220V-50 Hz.
- Záložný výkon: DC 24 Volt.
- Hnací plyn: Plynný dusík.
- Režim aktivácie: Automatický, Manuálny, Mechanický núdzový štart.
- Čas vybíjania HFC-227ea: menej ako 10 Sekúnd.
- Maximálny objem jedno ochranného pásma: menej ako 3600 m3.
- Maximálna jednotná oblasť ochranného pásma: menej ako 800 m2.
- Pilot alebo hnací plyn: Plynný dusík.
- Štartovací valec: 5L alebo 10L.
- Teplota okolia v miestnosti valcov: -10℃ to +50℃.
- Časové oneskorenie: 30 sekundy nastaviteľné.
- Teplota prostredia v ochrannom pásme: viac ako -10°C.
- Maximálny pracovný tlak: 5.3 Mpa alebo 8 Mpa.
- Režim potlačenia požiaru: totálne záplavy.
POZORNOSŤ!
Toto je pipying FM200 systém, ak niektoré projekty vyžadujú inštaláciu systému bez potrubia, Prosím, pozrite sa na naše 2.5 SYSTÉM MPA SKRINKY TYPU FM200.
FEATURES OF PIPYING HFC-227EA
The piping system has its features in the following points:
- Space saving and hfc-227ea agent saving, because one set of this system can cover several or some seperate fire protection rooms.
- Need pilot nitrogen gas to driving the system, its work pressure and cylinder storage pressure is a big high.
- Requires pipes to transmit the extinguishing agent to the fire protection zone.
- It evenly spray the extinguishing agent with highly effective.
- HFC-227ea agent is ECO-friendly, cause no pollution to the atmospheric environment.
- Generally, it needs to cooperate with the fire alarm system, It is compatible with the gas alarm system.
APPLICATIONS OF PIPYING FM200
It normally be applied and installed in some larger space:
- Switch-gear room.
- Data center.
- Serverovňa.
- Call centers.
- Počítačová miestnosť.
- Medical facilities.
- Power distribution room.
- Telekomunikačná miestnosť.
- Control room.
- Knižnica, Museums and Archive.
- Areas with flammable liquid storage.
- Hydraulic station.
- Lubricating oil depot.
- Dieselgenerátorová miestnosť.
- Direct combustion engine room.
- Oil fired boiler room.
- Gas station.
- The subway.
- Terminal building.
- Hospital Clinic.
- Clean workshop etc.
MAINTENANCE AND REPAIR
Just to be on the safe side, equipment maintenance and repair must be established and completely according to the international and China regulations.
During the maintenance and repair process, relevant regulations specified under GB50263-2007 " the Specifications of Gas Extinguishing Construction and Acceptance must be strictly performed.
- Keep the protection zone/area clean, dry and ventilation.
- Keep the surface of gas fire suppression equipment and fire alarm equipment clean and dustless.
- Keep the safety pin, and lead seal of the actuator intact.
- Ensure the completeness, cleanness readability of equipment nameplates and warning signs.
- Ensure the normality of fire extinguishing agent transmission pipeline and start-up pipeline.
- Check the pressure of the pilot cylinder as and agent gas cylinder, the pressure indicator should at the green area in its value.
- Check whether the appearance of all the components are deformed due to collision or with other mechanical damages.
- Check whether the system is well connected with fire alarm systems.
- Check whether it is firmly fixed.
If during the maintenance and repair job, you are suffer from problems, please search for help from our company, the user must notify our company via correspondence or telephone and emails.
This product must be maintained by professional technical personnel or our authorized distributors.
For International Standard, refer to NFPA 2001-Standard on Clean Agent Fire Extinguishing Systems. buy and download the relative documents if necessary.