Non-cylinder fire detecting tube is an innovation in the application of gas fire extinguishing system in small enclosed spaces; it uses the principle of thermal expansion and cold contraction of plastic pipes and the principle of gas spraying to extinguish the fire.
Easy to install, which can be compared with small aerosol generator.
This is a cost effective fire detection tube system which is easy to install and maintain, It contains a thermal tube which is manufactured with a poly-amide Tube, it also sealed with high quality of stainless steel plug.
About this white color of tube, it has two functions, one is to storage HFC-227ea or NOVEC 1230 gas, the other is to detect fire, obviously, this product does not need a special container, and the plastic pipe can be bent and installed conveniently.
Both HFC-227ea or NOVEC 1230 are clean agent, which makes it cause little damage to the electrical cabinet and eco-friendly, it is harmless to human body.
It can be started either by temperature detection or by electricity; if the temperature upwards and reaches its activation temperature at 110±10℃, the tube will melt down and spraying out gas to suppress fire; if you want it to be electricity activation, then after well installed, please make it connect with a 3 to 24v power supply, when the power is on the tube also will melt and creates a small hole to spraying gas out.
The detection tube dimension could be 18 (19) Au 30 mm, and length could be 0.5 Mita, 1 Mita, 1.5 Mita, 2 Mita, at most 8 Mita; the gas quality filling inside it including: 125 Gramu, 250 Gramu, 500 Gramu, 750 Gramu, 1000 Gramu, 1500 grams etc; different gas quality for covering different protection volume.
It is widely used in many small enclosure spaces, BLAZECUT is famous because of this, but we are also not bad, below are some of our cylinder-less fire detection tube parameters:
This fire detection tube tube is have similar features with Minisol aerosol fire extinguisher, except that aerosol generator is without pressure to storage, hereby below we list out the features of the tube fire suppression system:
It is normally be installed in electrical cabinets, control panel, and various of vehicles in their engine compartment, Aidha, it also can reach below fields:
Please consult our customer service personnel or technicians for other unclear precautions, Aware Fire Team will serve you wholeheartedly.
This fire hose is mainly used in the following two fields:
1. Electrical Cabinet.
The power industry is an important industry that affects the national economy and the people's livelihood. once the power supply and distribution system fails or is damaged, it will cause huge losses to the society. Therefore, it is necessary to protect electrical equipment. one of the main safety risks of electrical equipment is spontaneous combustion.
The electrical cabinet is in long-term operation. If overload, overheating, short circuit and other phenomena occur, It's easy to catch fire. It is very difficult to put out a fire manually in the electrical cabinet, owners often can only look at the fire and sigh. At this time, if the electrical cabinet has equipped with automatic protection device against spontaneous combustion, the economic loss of the owner will be greatly reduced if it is extinguished quickly.
2. Auto Vehicles.
The engine is the most important part of a car. once the engine fails or is damaged, it will cause huge losses to the owner. Therefore, it is necessary to protect the engine. one of the main safety risks of engines is spontaneous combustion.
The engine compartment is always at high temperature. In case of fuel leakage, aging and short circuit of wires, It's easy to catch fire. It is very difficult to put out a fire in the engine compartment manually, At this time, if it is equipped with automatic protection device against spontaneous combustion, the economic loss of auto vehicles owners will be greatly reduced if it is extinguished quickly.