MAELEZO YA MSINGI
Betri ya Lithium ni kipengele kidogo cha umeme, ambayo inafanya vifaa vingi vya kuzima moto kwenye soko kushindwa kufanana nayo, kampuni inayoitwa BLAZECUT utafiti nje ya rangi nyeupe moto kugundua bomba ambayo inaweza kujaza na HFC-227ea wakala au NOVEC1230 ndani, lakini kama ukubwa wake ni angalau kipenyo 18mm * 600mm, inaonekana pia sio suluhisho nzuri kwa ulinzi mdogo wa moto wa betri ya lithiamu-ion.
Hadi mwaka 2020 kiwanja chetu cha aerosol QRR0.012G / S / SA kilichapishwa, shida ya ulinzi wa moto kwa betri ya lithiamu-ioni imetatuliwa vizuri.
QRR0.012G / S / SA ni muundo mdogo wa chumba cha lithiamu-ion, lakini pia inaweza kuomba nafasi nyingine ndogo nyembamba, kama baraza la mawaziri la umeme na masanduku ya DB nk, kwa sababu ni ndogo ya kutosha kuwekwa kwenye sanduku la betri ya lithiamu.
MAELEZO NA VIGEZO
Chini tunaorodhesha karatasi kuu ya data ya kiufundi ya QRR0.012G / S / SA- Suluhisho la aerosol ya betri ya lithiamu:
- Aina: QRR0.012G / S / SA (Remark: 0.007, 0.02, 0.03, 0.04, 0.05, 0.06 Pia inapatikana)
- Ukubwa: Kipenyo 40 mm, na urefu wa 20 mm (Kulingana na Mwongozo wa Ufungaji wa QRR0.012G-S-SA).
- Umbali wa Nafasi ya Hole kwa Usakinishaji: φ40.1 * 54.1 mm.
- Mkusanyiko wa Aerosol: ≤60g kwa mita za ujazo.
- Kiasi cha kinga: 0.2 mita za ujazo.
- Muda wa Kutolewa kwa Aerosol: 4 Sekunde.
- Rangi ya Silinda: Nyekundu na rangi nyingine maalum ya kubuni.
- Imepimwa Joto la Mstari wa Thermal: 175° C.
- Urefu wa mstari wa thermal: 0.3 Mita (ckupanuliwa juu ya ombi la wateja).
- Urefu wa kebo ya umeme: 0.3 Mita (Inaweza kupanuliwa kulingana na ombi la wateja)
- Uamilisho wa Sasa: ≥701 mA (Ugavi wa Umeme wa Moja kwa Moja wa Sasa).
- Usalama wa Sasa: ≤151mA (Moja kwa Moja Sasa).
- Muda wa Kuanza umeme: Kuhusu 1 Pili.
- Masafa ya Joto ya Ambient: -50° C hadi +95 ° C.
- Muda wa Maisha: 15 Miaka.
- Muda wa Udhamini: 1 kwa 2 Miaka.
- Upatanifu: inaweza kufanya kazi na kengele ya moto na mfumo wa kugundua moto, hasa inaweza kufanana na jopo la kengele ya moto ya gaseous.
MFANO MWINGINE KAMA HUO UNAPATIKANA:
| Kipengee |
Urefu katika mm |
Kipenyo katika mm |
Kiasi cha kinga katika m³ |
Usakinishaji |
| QRR0.007G / S / SA |
40.00 |
20.00 |
0.1 |
exploding screws na / au 3M gundi |
| QRR0.016G / S / SA |
60.00 |
22.00 |
0.25 |
exploding screws na / au 3M gundi |
| QRR0.02G / S / SA |
60.00 |
25.50 |
0.30 |
exploding screws na / au 3M gundi |
| QRR0.03G / S / SA |
60.00 |
25.50 |
0.50 |
exploding screws na / au 3M gundi |
| QRR0.04G / S / SA |
99.00 |
27.50 |
0.60 |
exploding screws na / au 3M gundi |
| QRR0.05G / S / SA |
99.00 |
27.50 |
0.80 |
exploding screws na / au 3M gundi |
| QRR0.06G / S / SA |
99.00 |
27.50 |
1.00 |
exploding screws na / au 3M gundi |
Bonyeza hapa kusoma na kupakua MWONGOZO WA UFUNGAJI WA QRR0.012G / S / SA
Mtindo huu wa muundo maalum wa aerosol kwa ulinzi wa moto wa betri ya lithiamu, kama ni ndogo kwa ukubwa, pia inaweza kutumika katika nafasi nyingine ya enclosure,
ina upekee wake.
VIPENGELE
- Fundi wetu mwenye ujuzi aliyekwisha 60 miaka ya zamani maalum kubuni bidhaa hii kwa betri ya lithiamu-ion, Muundo wa bidhaa ni mzuri na kamilifu.
- Aerosol yenye mwelekeo mdogo, hasa urefu wa erosoli unahusu 2 Cm, Inaweza kuwa na uwezo wa kufunga katika masanduku ya betri ya lithiamu.
- Aerosol ni ya kiwanja safi cha kuzima, haiachi mabaki baada ya kuruhusiwa, Thamani yake ya ongezeko la joto duniani na thamani ya kupungua kwa tabaka la ozoni ni karibu sifuri, haitaharibu vipengele katika betri ya lithiamu.
- Mkusanyiko mkubwa, ubora mdogo wa erosoli hufunika kiasi kikubwa, uzito wake mwepesi na kuokoa nafasi.
- Inaweza kuwa na kazi ya maoni ya ishara, na kazi ya uanzishaji ni: joto pamoja na kuanza kwa umeme.
- Inaweza kufanya kazi na kifaa cha kuchochea peke yake kinachoitwa "KIFAA CHA UANZISHAJI WA JOTO".
PROGRAMU TUMIZI
- Magari madogo
- Vifaa vizito ikiwemo: Loader, Excavator, Shambulio la kimbinu / udhibiti wa ghasia, Bulldozer.
- Pikipiki ya umeme.
- Sanduku dogo la umeme.
- Bidhaa ndogo za umeme.
- Betri za Lithium-ion.
- Refrigerator.
- Washing machine.
- Air conditioner.
- Cable connector.
- 3D printers.
- Special army and police vehicles.
- Telecom tower schetters.
- Ventilation devices.
- Laser cuttings.
FIRE SUPPRESSION CLASS
- Class A fire-Solid Combustibles.
- Class B fire-Flammable Liquids.
- Class C fire-Flammable Gases.
- Class E fire-Electrical Appliances.
QRR0.012G/S/SA aerosol fire suppression device can suppress fire of Class A, B, C, E rapidly.
The device is suitable for ambient temperature of -50℃ to +95℃ (in short time can reach +125℃), most suitable for small enclosure space fire protection, such as small electrical cabinet/panel, coffer, lithium battery etc; it belongs to fixed type fire suppression system.
KANUNI YA KUFANYA KAZI
When the device get activation signal from the fire control panel or from the thermal cord, the aerosol compound inside the device is activated, then rapidly cause aerosol particles gas and the gas running out from the nozzle(side), to total flooding in the fire protection zone, to suppress the fire.
ATTENTION FOR TRAMSPORTATON AND STORE.
- Do not get close to heat source when it is being in transportation, store and installation, please avoid sunlight and rain.
- Do not use the product when the aerosol device’s outer shell is damaged.
- Do not disassemble the device without the permission of the manufacturer.
- People who enter the site must wear gas mask, in case of the aerosol device is being in discharging.
INSPECTION
- Please read carefully the installation manual before installation, and check the device and its accessories, install it after confirm of every components are good.
- Inspection Method:
- Appearance Inspection: check the appearance of the device, it should not drop paint, no indentation and no deformation, and accessories should be complete.
- The product has passed strict factory inspection, however, the device and its accessories may be damaged due to various reasons during transportation; so when do installation, it is necessary to inspect each device according to above method.
INSTALLATION AND MAINTENANCE
- Take out the installation bracket of the aerosol device and fix it, there should be no obstacles between the aerosol device and the protective objectives. if necessary, the installer can install the auxiliary support also, the auxiliary support should be able to bear at least 5 times the weight of aerosol device, to make sure the aerosol device is firmly installed.
- When installation, you need to consider avoid high temperature areas above 95℃. hakupaswi kuwa na vikwazo ndani ya 0.1m kwa kipenyo cha kifaa cha erosoli.
- Usitenganishe kifaa bila idhini ya mtengenezaji. Kamba ya joto inapaswa kupangwa pamoja na mahali ambapo moto labda utatokea; ni marufuku kuiweka kwenye mabomba ya joto kali, katika kesi ya kuanzishwa kwa makosa.
- Baada ya kuachia, silinda ya kifaa cha erosoli ni moto sana na joto kali, hivyo ni marufuku kuigusa, Subiri hadi ipoe kabla ya kuishughulikia.
- Wakati wake halali, haina haja ya kufanya ukaguzi wa ubora wa kila mwaka; Mitungi ya kifaa cha erosoli inahitaji kusafishwa mara kwa mara kwa vumbi na chafu kulingana na hali halisi; iwapo itabainika kuharibika au kuharibika, inapaswa kubadilishwa kwa wakati; Angalia wiring mara kwa mara kwa mzunguko wazi, short circuit and resistance value of the ignition device and keep records.
- The related losses caused by abnormal installation, maintenance and use are not within the scope of the company's warranty.
Circular Shape Small Aerosol fire extinguisher for Hybrid Solar Inverter
Chombo cha Kukandamiza Moto chenye manufaa kwa Wapakiaji wa Gurudumu la Mashine za Ujenzi